FUEL INSTRUMENTS & ENGINEERS PVT.LTD.
Enquiry Contact Us Product About Us Home Download
 

Universal Testing Machines - Model : UTE

 

Electronic Universal Testing Machines - Model : UTE

   
UNIVERSAL TESTING MACHINES
   
• Loading accuracy as high as + 1%.
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behavior of the materials.
• Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing
   of test specimen.
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of  materials
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories, including load stabilizer.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standard specimens as well as structures.
• Simple controls for easy of operation.
• Robust straining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed and protected pressure transducer.
 
• RS 232 serial port to transfer data to computer for analysis/storage evaluation etc.
• Manual control & release valve operation.
Universal Testing Machines
 
Application :
FIE Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conducted.
Attachment for Tension Test for shouldered and threaded specimens
Principal of Operation :
Operation of the machine is by hydraulic transmission of load from the test specimen through pressure transducer to a separately house load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.
Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding to the load exerted by the main ram.Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously.
Machine consists of :
Attachment for Tension Test for shouldered and threaded specimens
Straining Unit :
This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper crosshead is rigidly fixed to the table by two strenthened columns.

The lower crosshead is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating.

An displacement scale with a minimum graduation of 1mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-heads and the table.
The lower cross-head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.
Tension Test
Tension Test
Control Panel :
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic display unit.
Transverse Test
Power Pack :
The power pack generates the maximum pressure of 200 kgf/cm2. The hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.
Hydraulic Controls :
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.
Electronic Control Unit : (Series Universal 2001-UTE)
Microprocessor based panel incorporating state of art technology wiyh following features.
Transverse Test
- Front panel membrane type key board for machine operation with numeric keys for data entry.
- 7- segment display.
- Data entry with numeric keyboard of test parameters including speds, rupture % peak, preload, modulus data,
  test data & specimen data etc.
- 20input data set strorage, 50 results storage maintains sata results during power off.
- Batch test facility for generating batch & statistic result using same data set.
- RS 232C serial port, Optional windows based software available for...
- On line graph on PC. Data analysis, statistics, point tracing superimposing graphs to compare with standard,
   zooming graph etc.
Printer port for printer interface with ...
Graph & result printout. Test certificate printout .
Batch Certificate printout .Simple statistic printout.
Universal 2001-UTE
Optional Software Packages on PC :
The UNIVERSAL 2001 - UTE series control panel can be hooked to any PC using RS-232 communication port. FIE offers different exhaustive application, Window based software packages with real time graph on PC to enable the user to effectively evaluated different parameters.
Universal 2001-UTE
The feature include :
Attachment for Tension Test for Wire Ropes
Real time graph, User friendly software.
Extensive graphics on screen for curve plotting, magnification and zooming.
Software features includes Graph comparison, point tracing facility. Different units selection for load &
   displacement.
Statistical evaluation includes with water fall dig. Mean deviation, frequency distribution, Skew dig., Histogram.    Also calculates max. value, min. value, Mean value, Variance, Standard Deviation. (Other statistical parameters
   on request). Selectable batch & statistical printouts.
Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's
   modulus, yield stress, proof stress etc.
Software packages for shear, Bend, Torsion, Rubber, Textile testing etc.
Custom built application software to suit customer requirements.
Attachment for Tension Test for Wire Ropes
Accuracy and Calibration :
 
All FIE Electronic Universal Testing Machines are closely controlled for sensitivity, accuracy and calibartion during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British standards. 1610 : Part1 : 1992 and IS : 1828 : Part1 : 1991.
FIE Electronic Universal Testing Machine comply with Grade "A" of BS : 1610 : Part1 : 1992 and class 1 of IS-1828-Part-1:1991. An accuracy of +1% is guaranted from 2% to 100% of the capacity of the machine.
Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.
Compression Test
UTE Panel/PC Controlled Machine, Servo Controlled Model available.
It is with motorised control valve & automatic operation with given loading /elongation rate.
 
Compression Test
 Specification :
 
Model
Units
UTE-10
UTE-20
UTE-40
UTE-60
UTE-100
UTE-200
UTE-300
Maximum Capacity
kN
100
200
400
600
1000
2000
3000
Measuring Range
kN
0-100
0-200
0-400
0-600
0-1000
0-2000
0-3000
Load Resolution (20,000 counts full scale)
N
5
10
20
30
50
100
150
Load Range with Accuracy of measurement ± 1.0%
kN
2 to100
4 to 200
8 to 400
12 to 600
20 to 1000
40 to 2000
60 to 3000
Resolution of piston movement (Displacement)
mm
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Clearance for tensile at fully descended working piston.
mm
50-700
50-700
50-700
50-800
50-850
50-900
50-900
Clearance for compression test at fully descended working piston.
mm
0-700
0-700
0-700
0-800
0-850
0-900
0-900
Clearance between columns.
mm
500
500
500
600
750
850
850
Ram Stroke
mm
150
200
200
250
250
300
300
Straining/piston speed (at no load)
mm/min
0-300
0-150
0-150
0-100
0-80
0-45
0-50
Connected Load
  
  
   
  
  
  
  
Power
kW
1.0
1.0
1.7
1.9
2.6
4.9
6.4
V
  
400-440
400-440
400-440
400-440
400-440
400-440
400-440
Ø
  
3
3
3
3
3
3
3
Dimensions
L x W x H ( approx. )
mm
2032 x
750 x
1960 x
2032 x
750 x
1960 x
2060 x
750 x
2180 x
2265 x
750 x
2534 x
2415 x
815 x
2900 x
3000 x 1200 x 3600 x
3500 x 1900 x 4550 x
Weight (approx.)
kg-
1500
1500
2500
3500
5500
9500
15,000
Standard Accessories
For Tension Test
  
• Clamping jaws for round specimens of Diameters.
mm
10-20
20-30
10-20
20-30
10-25
25-40
10-25
25-40
40-55
10-25
25-45
45-70
20-40
40-60
60-80
25-50
50-70
70-90
•  Clamping jaws for flat specimens of thickness.
mm
0 - 10
10 - 20
0 - 10
10 - 20
0 - 15
15 - 30
0 - 15
15 - 30
0 - 22
22 - 44
44 - 65
0 - 20
20 - 45
45 - 70
0 - 25
25 - 50
50 - 75
Width
mm
50
50
65
70
70
90
100
For Compression Test
Pair of compression plates of dia.
mm
120
120
120
120
160
220
220
For Transverse Test
Table with adjustable rollers width of rollers.
mm
160
160
160
160
160
200
200
Diameter of Rollers
mm
30
30
30
50
50
70
70
Maximum clearance between supports
mm
500
500
500
600
800
900
1000
Radius of punch tops.
mm
6, 12
6, 12
12, 16
16, 22
16, 22
30, 40
50, 75
   
    Special Accessories :

• Load Stabilizer
• Printer
• Plotter
• Brinell Test Attachment
• Electronic Extensometer
• Piston Movement Resolution of 0.01 mm
• Electronic Load Pacer
• Shear Test Attachment
• Software Packages
• Mechanical Extensometer  
• Wide range accessories offered on request at
   additional cost.
• Due to constant R& D specifications & features
   are subjest to change without notice.
• The dimensions given above are approximate.
 
Electronic Universal Testing Machines - Model : UTES (Servo)
   

       Universal Testing Machines Mechanical

 
• Motorised Control Valve.
• Load accuracy as high + 1%.
• Straining at variable speeds to suit a wide range of materials.
• Printer & PC graphs enable study the behavior of the material.
• Motor driven threaded columns for quick effortless adjustment of middle crosshead to facilitate rapid fixing of test specimen.
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enable testing of standard specimens as well structures.
• Simple controls for ease of operation.
• Robust straining frame of an extremely rigid construction.
• Fully enclosed and protected pressure transducer.
• RS 232 serial port for PC control of m/c.


Application :
FIE Electronic Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also conducted.
Attachment for Tension Test for shouldered and threaded specimens
Principal of Operation :
Here UTM Right Control Valve is Servo Controlled in close loop mode as per mode selection. Following control modes available :
1) Standard Manual Control
2) Potentiometric Control
3) Load Rate Control
4) Elongation Rate Control
5) Load Hold Mode
6) Strain Rate Control
Also Auto Start, Potentiometric start & Initial Valve open start options are available for test to take care of slippage & different specimen types.
Load is applied by hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit, corresponding to the load exerted by the main ram. Simulteniously the digital encoder fitted on the straining unit gives the mechanical displacement.
Attachment for Tension Test for shouldered and threaded specimens
Machine consists of :
Straining Unit :
Tension Test
This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two strenthened columns.

The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating.

An displacement scale with a minimum graduation of 1mm, is provided to measure the deformation of the specimen.

Tension test is conducted by gripping the test specimen between the upper and lower cross-heads.

Compression, transverse , bending, shear & hardness tests are conducted between the lower cross-head and the table.

The lower cross-head can be raised or lowered rapidly by operating the screwed columns, thus facilitating ease of fixing of the test specimen.
Tension Test
Control Panel :
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic display unit.
Compression Test
Power Pack :
The power pack generates the maximum pressure of 200 kgf/cm2. The hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.
Hydraulic Controls :
Hand operated Release Valve & motorised control valve are used to control the flow to and from the hydraulic cylinder. The regulation of the oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement. Control by this valve allows extensometer reading to be taken.
Electronic Control Panel : (FIE- Servo)
Compression Test

- In Electronic panel 8085 microprocessor is used for basic UTM operation & an 8 bit dedicated
  microcontroller is used for close loop & Servo Control.
- Panel is having parallel printer port, RS 232 C serial port for PC interface.
- 2 lines x 8 digits 7 segment display & membrane keyboard for data entry.
- 20 data sets and 50 results storage.

Software :
Windows based basic software for Servo Control is in standard scope of supply.
Real Time graph, User friendly software.
Extensive graphics on screen for curve plotting, magnification and zooming.
Software features include Graph comparison, point tracing facility. Different units selection for load & displacement.
Statistical evaluation with water fall dig., Mean deviation, frequency distribution, Skew dig., Histogram. Also
   calculates max. value, min.value, Mean Value, Variance, Standard Deviation. (Other statistical parameters on
   request). Selectable batch & statistical printouts.
Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's
   modulus, yield stress, proof stress etc.
Optional Software packages for Extensometer, Shear Bend, Torsion, Rubber, Textile testing etc.
Accuracy and Calibration :
Universal 2001-UTE
All FIE Electronic Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British standards.1610 : Part 1 : 1992 and IS : 1828 : Part 1 : 1991.
Attachment for Tension Test for Wire Ropes
Fie Electronic Universal Testing Machine comply with Grade "A" of BS : 1610 : Part 1 : 1992 and class 1 of IS - 1828-Part 1:1991. An accuracy of + 1% is guaranted from 2% to 100% of the capacity of the machine.
Below 20% of the selected range , the maximum permissible error is 0.2% of the full load reading.
 Specifications :
Attachment for Tension Test for Wire Ropes Compression Test
   
   
Model
Units
UTES-10
UTES-20
UTES-40
UTES-60
UTES-100
Maximum Capacity
kN
100
200
400
600
1000
Measuring Range
kN
0-100
0-200
0-400
0-600
0-1000
Load Resolution (20,000 counts full scale)
N
5
10
20
30
50
Load Range with Accuracy of measurement ± 1.0%
kN
2 to100
4 to 200
8 to 400
12 to 600
20 to 1000
Resolution of piston movement (Displacement)
mm
0.01
0.01
0.01
0.01
0.01
Clearance for tensile at fully descended working piston.
mm
50-700
50-700
50-700
50-800
50-850
Clearance for compression test at fully descended working piston.
mm
0-700
0-700
0-700
0-800
0-850
Clearance between columns.
mm
500
500
500
600
750
Ram Stroke
mm
150
200
200
250
250
Straining/piston speed (at no load)
mm/min
0-300
0-150
0-150
0-100
0-80
Connected Load
  
  
   
  
  
Power
kW
1.0
1.0
1.7
1.9
2.6
Voltage
V ac
400-440
400-440
400-440
400-440
400-440
Phase(Ø)
  
3
3
3
3
3
Dimensions
L x W x H ( approx. )
mm
2032 x
750 x
1960 x
2032 x
750 x
1960 x
2060 x
750 x
2180 x
2265 x
750 x
2534 x
2415 x
815 x
2900 x
Weight (approx.)
kg.
1500
1500
2500
3500
5500
Standard Accessories
For Tension Test
  
• Clamping jaws for round specimens of Diameters.
mm
10-20
20-30
10-20
20-30
10-25
25-40
10-25
25-40
40-55
10-25
25-45
45-70
•  Clamping jaws for flat specimens of thickness.
mm
0 - 10
10 - 20
0 - 10
10 - 20
0 - 15
15 - 30
0 - 15
15 - 30
0 - 22
22 - 44
44 - 65
Width
mm
50
50
65
70
70
For Compression Test
Pair of compression plates of dia.
mm
120
120
120
120
160
For Transverse Test
Table with adjustable rollers width of rollers.
mm
160
160
160
160
160
Diameter of Rollers
mm
30
30
30
50
50
Maximum clearance between supports
mm
500
500
500
600
800
Radius of punch tops.
mm
6, 12
6, 12
12, 16
16, 22
16, 22
   
    Special Accessories & options :

• Electronic Extensometer
• Brinell Test Attachment
• Printer
• Shear Test Attachment
• Software Packages
• Wide range accessories offered on request at additional cost.
• Due to constant R& D specifications & features are subjest to change without notice.
• The dimensions given above are approximate.
 
 
 
Quick Links  
 
• Universal Testing Machines • Electronic Universal Testing Machines [ Model : UTE ] • Electronic Universal Testing Machines [ Model : UTES (Servo) ] • Electronic Universal Testing Machines [ Model: UTE 40 HGFL ] • Model Unitek 9400 Series with PC Interface & Real Time Graph • Model Unitek 9700 Series with Interface & Real Time Graph • Electronic Four Column Compression Testing Machines [ CTE 200 & 300 4C ] • Electronic Compression Testing Machines • Compression Testing Machines • Torsion Testing Erichsen Machines• Spring Testing Machines (Model : STE) • Electronic Torsion Testing Machines [Model : TTE] • Mechanical & Electronic Mechanical Extensometer [ EM-1 & EE2 ] • Impact Testing Machines [Model : IT-30 & IT-30 (D)] • Dynamic Balancing Machine (Model HDM) • Dynamic Balancing Machine (Model HDVM & HDVTM)• Dynamic Balancing Machine (Model HDCM) • Hardness Testers [ Models : RAS, RAB-1, RAB-250, Twin ] SAROJ Make • Brinell Hardness Tester [Model : B 3000 (H)] SAROJ Make • Brinell Hardness Tester [Model : B 3000 (O)] SAROJ Make • Hardness Testing Machines ( RASN Series )  [For Rockwell,Rockwell Superficial & Brinell Testing] FIE Make • Hardness Testing Machines [Series : RASNE]• Vickers Hardness Tester [Model : VM-50] • Computerised Hardness Tester [Model : VM 50 PC] Vickers• Computerised Brinell Hardness Tester [Model : B3000-PC] • Computerised Fully Automatic Brinell Hardness Tester [ Model : B3000-PC-FA ] • Computerised Brinell Image Analysis System [ B.I.A.S ] • Computerised Microvickers Hardness Tester [ MV-1 PC ] • Portable Hardness Tester [Model : PR 1] • Electronic Universal Testing Machines [ UTE - HGFL ]• Inline Brinell Hardness Tester [ Model : B3000-Spl ]